⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Esmeralda County › Dyer (89010)

Dyer, NV (89010): well depth, water level & drilling cost

✓ 378 NDWR records · Esmeralda County

238 ftmedian well depth
153 ft–359 fttypical depth range
80 ftmedian static water level
50 gpmmedian yield (180 tests)

Pull every recorded well near a Dyer (89010) address — $49

How deep are wells in and around Dyer (89010), Nevada?

The median drilled well depth in and around Dyer (89010) is 238 ft, based on 372 wells with recorded depths in the state NDWR database. Half fall between 153 ft and 359 ft; 90% are shallower than 501 ft.

How much does it cost to drill a well in and around Dyer (89010)?

Applying published per-foot rates to the local median depth of 238 ft: drilling and casing alone typically runs $5,950–$15,470; a complete system including pump, pressure tank, and hookup typically runs $14,280–$23,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dyer (89010)?

The median static water level is 80 ft below ground surface (middle half of wells: 49 ft–119 ft), from 324 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 22 100–150 ft 61 150–200 ft 47 200–300 ft 96 300–400 ft 68 400–600 ft 47 600+ ft 30
Looking at a specific property in Dyer (89010)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dyer (89010)

Free. Goes to licensed drillers working Esmeralda County.

Part of Esmeralda County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.