⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Clark County › Indian Springs (89018)

Indian Springs, NV (89018): well depth, water level & drilling cost

✓ 268 NDWR records · Clark County

115 ftmedian well depth
62 ft–200 fttypical depth range
40 ftmedian static water level
50 gpmmedian yield (72 tests)

Pull every recorded well near a Indian Springs (89018) address — $49

How deep are wells in and around Indian Springs (89018), Nevada?

The median drilled well depth in and around Indian Springs (89018) is 115 ft, based on 266 wells with recorded depths in the state NDWR database. Half fall between 62 ft and 200 ft; 90% are shallower than 464 ft.

How much does it cost to drill a well in and around Indian Springs (89018)?

Applying published per-foot rates to the local median depth of 115 ft: drilling and casing alone typically runs $2,875–$7,475; a complete system including pump, pressure tank, and hookup typically runs $6,900–$11,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Indian Springs (89018)?

The median static water level is 40 ft below ground surface (middle half of wells: 20 ft–70 ft), from 194 measurements.

Drilled depth distribution

0–50 ft 46 50–100 ft 55 100–150 ft 54 150–200 ft 42 200–300 ft 24 300–400 ft 6 400–600 ft 25 600+ ft 14
Looking at a specific property in Indian Springs (89018)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Indian Springs (89018)

Free. Goes to licensed drillers working Clark County.

Part of Clark County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.