⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Clark County › Moapa (89067)

Moapa, NV (89067): well depth, water level & drilling cost

✓ 535 NDWR records · Clark County

40 ftmedian well depth
25 ft–81 fttypical depth range
13 ftmedian static water level
5 gpmmedian yield (54 tests)

Pull every recorded well near a Moapa (89067) address — $49

How deep are wells in and around Moapa (89067), Nevada?

The median drilled well depth in and around Moapa (89067) is 40 ft, based on 520 wells with recorded depths in the state NDWR database. Half fall between 25 ft and 81 ft; 90% are shallower than 136 ft.

How much does it cost to drill a well in and around Moapa (89067)?

Applying published per-foot rates to the local median depth of 40 ft: drilling and casing alone typically runs $1,000–$2,600; a complete system including pump, pressure tank, and hookup typically runs $2,400–$4,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Moapa (89067)?

The median static water level is 13 ft below ground surface (middle half of wells: 7 ft–20 ft), from 334 measurements.

Drilled depth distribution

0–50 ft 296 50–100 ft 109 100–150 ft 65 150–200 ft 31 200–300 ft 1 300–400 ft 1 400–600 ft 3 600+ ft 14
Looking at a specific property in Moapa (89067)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Moapa (89067)

Free. Goes to licensed drillers working Clark County.

Part of Clark County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.