⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Washoe County › Sparks (89431)

Sparks, NV (89431): well depth, water level & drilling cost

✓ 172 NDWR records · Washoe County

40 ftmedian well depth
27 ft–100 fttypical depth range
19 ftmedian static water level
30 gpmmedian yield (49 tests)

Pull every recorded well near a Sparks (89431) address — $49

How deep are wells in and around Sparks (89431), Nevada?

The median drilled well depth in and around Sparks (89431) is 40 ft, based on 172 wells with recorded depths in the state NDWR database. Half fall between 27 ft and 100 ft; 90% are shallower than 267 ft.

How much does it cost to drill a well in and around Sparks (89431)?

Applying published per-foot rates to the local median depth of 40 ft: drilling and casing alone typically runs $1,000–$2,600; a complete system including pump, pressure tank, and hookup typically runs $2,400–$4,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Sparks (89431)?

The median static water level is 19 ft below ground surface (middle half of wells: 13 ft–31 ft), from 145 measurements.

Drilled depth distribution

0–50 ft 92 50–100 ft 36 100–150 ft 16 150–200 ft 6 200–300 ft 6 300–400 ft 7 400–600 ft 9 600+ ft 0
Looking at a specific property in Sparks (89431)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Sparks (89431)

Free. Goes to licensed drillers working Washoe County.

Part of Washoe County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.