⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Washoe County › Sparks (89434)

Sparks, NV (89434): well depth, water level & drilling cost

✓ 738 NDWR records · Washoe County

125 ftmedian well depth
39 ft–300 fttypical depth range
24 ftmedian static water level
20 gpmmedian yield (259 tests)

Pull every recorded well near a Sparks (89434) address — $49

How deep are wells in and around Sparks (89434), Nevada?

The median drilled well depth in and around Sparks (89434) is 125 ft, based on 712 wells with recorded depths in the state NDWR database. Half fall between 39 ft and 300 ft; 90% are shallower than 480 ft.

How much does it cost to drill a well in and around Sparks (89434)?

Applying published per-foot rates to the local median depth of 125 ft: drilling and casing alone typically runs $3,125–$8,125; a complete system including pump, pressure tank, and hookup typically runs $7,500–$12,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Sparks (89434)?

The median static water level is 24 ft below ground surface (middle half of wells: 11 ft–73 ft), from 619 measurements.

Drilled depth distribution

0–50 ft 223 50–100 ft 96 100–150 ft 71 150–200 ft 55 200–300 ft 80 300–400 ft 69 400–600 ft 87 600+ ft 31
Looking at a specific property in Sparks (89434)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Sparks (89434)

Free. Goes to licensed drillers working Washoe County.

Part of Washoe County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.