⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Washoe County › Sparks (89436)

Sparks, NV (89436): well depth, water level & drilling cost

✓ 416 NDWR records · Washoe County

113 ftmedian well depth
40 ft–297 fttypical depth range
27 ftmedian static water level
25 gpmmedian yield (114 tests)

Pull every recorded well near a Sparks (89436) address — $49

How deep are wells in and around Sparks (89436), Nevada?

The median drilled well depth in and around Sparks (89436) is 113 ft, based on 345 wells with recorded depths in the state NDWR database. Half fall between 40 ft and 297 ft; 90% are shallower than 416 ft.

How much does it cost to drill a well in and around Sparks (89436)?

Applying published per-foot rates to the local median depth of 113 ft: drilling and casing alone typically runs $2,825–$7,345; a complete system including pump, pressure tank, and hookup typically runs $6,780–$11,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Sparks (89436)?

The median static water level is 27 ft below ground surface (middle half of wells: 10 ft–64 ft), from 298 measurements.

Drilled depth distribution

0–50 ft 141 50–100 ft 20 100–150 ft 35 150–200 ft 17 200–300 ft 49 300–400 ft 41 400–600 ft 20 600+ ft 22
Looking at a specific property in Sparks (89436)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Sparks (89436)

Free. Goes to licensed drillers working Washoe County.

Part of Washoe County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.