⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Humboldt County › Valmy (89438)

Valmy, NV (89438): well depth, water level & drilling cost

✓ 677 NDWR records · Humboldt County

348 ftmedian well depth
136 ft–650 fttypical depth range
118 ftmedian static water level
25 gpmmedian yield (280 tests)

Pull every recorded well near a Valmy (89438) address — $49

How deep are wells in and around Valmy (89438), Nevada?

The median drilled well depth in and around Valmy (89438) is 348 ft, based on 672 wells with recorded depths in the state NDWR database. Half fall between 136 ft and 650 ft; 90% are shallower than 1,000 ft.

How much does it cost to drill a well in and around Valmy (89438)?

Applying published per-foot rates to the local median depth of 348 ft: drilling and casing alone typically runs $8,700–$22,620; a complete system including pump, pressure tank, and hookup typically runs $20,880–$34,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Valmy (89438)?

The median static water level is 118 ft below ground surface (middle half of wells: 51 ft–266 ft), from 475 measurements.

Drilled depth distribution

0–50 ft 70 50–100 ft 50 100–150 ft 74 150–200 ft 38 200–300 ft 68 300–400 ft 51 400–600 ft 116 600+ ft 205
Looking at a specific property in Valmy (89438)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Valmy (89438)

Free. Goes to licensed drillers working Humboldt County.

Part of Humboldt County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.