⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Washoe County › Reno (89506)

Reno, NV (89506): well depth, water level & drilling cost

✓ 2,162 NDWR records · Washoe County

168 ftmedian well depth
120 ft–265 fttypical depth range
66 ftmedian static water level
15 gpmmedian yield (1,025 tests)

Pull every recorded well near a Reno (89506) address — $49

How deep are wells in and around Reno (89506), Nevada?

The median drilled well depth in and around Reno (89506) is 168 ft, based on 2,137 wells with recorded depths in the state NDWR database. Half fall between 120 ft and 265 ft; 90% are shallower than 383 ft.

How much does it cost to drill a well in and around Reno (89506)?

Applying published per-foot rates to the local median depth of 168 ft: drilling and casing alone typically runs $4,200–$10,920; a complete system including pump, pressure tank, and hookup typically runs $10,080–$16,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Reno (89506)?

The median static water level is 66 ft below ground surface (middle half of wells: 35 ft–125 ft), from 1,936 measurements.

Drilled depth distribution

0–50 ft 296 50–100 ft 97 100–150 ft 475 150–200 ft 389 200–300 ft 472 300–400 ft 222 400–600 ft 138 600+ ft 48
Looking at a specific property in Reno (89506)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Reno (89506)

Free. Goes to licensed drillers working Washoe County.

Part of Washoe County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.