⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Washoe County › Reno (89507)

Reno, NV (89507): well depth, water level & drilling cost

✓ 160 NDWR records · Washoe County

83 ftmedian well depth
61 ft–105 fttypical depth range
44 ftmedian static water level
20 gpmmedian yield (33 tests)

Pull every recorded well near a Reno (89507) address — $49

How deep are wells in and around Reno (89507), Nevada?

The median drilled well depth in and around Reno (89507) is 83 ft, based on 157 wells with recorded depths in the state NDWR database. Half fall between 61 ft and 105 ft; 90% are shallower than 157 ft.

How much does it cost to drill a well in and around Reno (89507)?

Applying published per-foot rates to the local median depth of 83 ft: drilling and casing alone typically runs $2,075–$5,395; a complete system including pump, pressure tank, and hookup typically runs $4,980–$8,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Reno (89507)?

The median static water level is 44 ft below ground surface (middle half of wells: 40 ft–55 ft), from 144 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 108 100–150 ft 26 150–200 ft 9 200–300 ft 6 300–400 ft 2 400–600 ft 1 600+ ft 0
Looking at a specific property in Reno (89507)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Reno (89507)

Free. Goes to licensed drillers working Washoe County.

Part of Washoe County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.