⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Washoe County › Reno (89508)

Reno, NV (89508): well depth, water level & drilling cost

✓ 1,533 NDWR records · Washoe County

200 ftmedian well depth
140 ft–300 fttypical depth range
78 ftmedian static water level
20 gpmmedian yield (985 tests)

Pull every recorded well near a Reno (89508) address — $49

How deep are wells in and around Reno (89508), Nevada?

The median drilled well depth in and around Reno (89508) is 200 ft, based on 1,525 wells with recorded depths in the state NDWR database. Half fall between 140 ft and 300 ft; 90% are shallower than 500 ft.

How much does it cost to drill a well in and around Reno (89508)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Reno (89508)?

The median static water level is 78 ft below ground surface (middle half of wells: 45 ft–131 ft), from 1,374 measurements.

Drilled depth distribution

0–50 ft 61 50–100 ft 128 100–150 ft 260 150–200 ft 242 200–300 ft 438 300–400 ft 156 400–600 ft 136 600+ ft 104
Looking at a specific property in Reno (89508)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Reno (89508)

Free. Goes to licensed drillers working Washoe County.

Part of Washoe County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.