⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Washoe County › Reno (89509)

Reno, NV (89509): well depth, water level & drilling cost

✓ 467 NDWR records · Washoe County

225 ftmedian well depth
125 ft–327 fttypical depth range
34 ftmedian static water level
25 gpmmedian yield (206 tests)

Pull every recorded well near a Reno (89509) address — $49

How deep are wells in and around Reno (89509), Nevada?

The median drilled well depth in and around Reno (89509) is 225 ft, based on 462 wells with recorded depths in the state NDWR database. Half fall between 125 ft and 327 ft; 90% are shallower than 505 ft.

How much does it cost to drill a well in and around Reno (89509)?

Applying published per-foot rates to the local median depth of 225 ft: drilling and casing alone typically runs $5,625–$14,625; a complete system including pump, pressure tank, and hookup typically runs $13,500–$22,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Reno (89509)?

The median static water level is 34 ft below ground surface (middle half of wells: 22 ft–80 ft), from 347 measurements.

Drilled depth distribution

0–50 ft 62 50–100 ft 27 100–150 ft 50 150–200 ft 61 200–300 ft 115 300–400 ft 65 400–600 ft 42 600+ ft 40
Looking at a specific property in Reno (89509)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Reno (89509)

Free. Goes to licensed drillers working Washoe County.

Part of Washoe County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.