⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Washoe County › Reno (89523)

Reno, NV (89523): well depth, water level & drilling cost

✓ 202 NDWR records · Washoe County

200 ftmedian well depth
130 ft–301 fttypical depth range
51 ftmedian static water level
20 gpmmedian yield (114 tests)

Pull every recorded well near a Reno (89523) address — $49

How deep are wells in and around Reno (89523), Nevada?

The median drilled well depth in and around Reno (89523) is 200 ft, based on 196 wells with recorded depths in the state NDWR database. Half fall between 130 ft and 301 ft; 90% are shallower than 471 ft.

How much does it cost to drill a well in and around Reno (89523)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Reno (89523)?

The median static water level is 51 ft below ground surface (middle half of wells: 25 ft–98 ft), from 167 measurements.

Drilled depth distribution

0–50 ft 17 50–100 ft 19 100–150 ft 25 150–200 ft 31 200–300 ft 46 300–400 ft 32 400–600 ft 11 600+ ft 15
Looking at a specific property in Reno (89523)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Reno (89523)

Free. Goes to licensed drillers working Washoe County.

Part of Washoe County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.