⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Elko County › Wells (89835)

Wells, NV (89835): well depth, water level & drilling cost

✓ 428 NDWR records · Elko County

130 ftmedian well depth
25 ft–260 fttypical depth range
28 ftmedian static water level
44 gpmmedian yield (180 tests)

Pull every recorded well near a Wells (89835) address — $49

How deep are wells in and around Wells (89835), Nevada?

The median drilled well depth in and around Wells (89835) is 130 ft, based on 421 wells with recorded depths in the state NDWR database. Half fall between 25 ft and 260 ft; 90% are shallower than 410 ft.

How much does it cost to drill a well in and around Wells (89835)?

Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wells (89835)?

The median static water level is 28 ft below ground surface (middle half of wells: 13 ft–65 ft), from 322 measurements.

Drilled depth distribution

0–50 ft 158 50–100 ft 25 100–150 ft 40 150–200 ft 43 200–300 ft 60 300–400 ft 43 400–600 ft 28 600+ ft 24
Looking at a specific property in Wells (89835)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wells (89835)

Free. Goes to licensed drillers working Elko County.

Part of Elko County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.